- AUTOMOTIVE EQUIPMENT
- INDUSTRIAL EQUIPMENT
- LABORATORY EQUIPMENT
- ULTRASONIC GENERATORS AND EMITTERS
REQUEST A QUOTE
Model with 3.5’’ TFT color display with access to power switching and basic settings
AVAILABLE POWERS: From 1000Wp to 2000Wp, with automatic power tracking, and optimum working point tracking, with three tracking modes, anti-stationary wave and anti-wave system in the tank.
POWER INPUT VOLTAGE: 230V/50Hz.
AC POWER CONSUMPTION: Up to 1000Wrms.
PEAK POWER CONSUMPTION: Up to 2000Wp.
AVAILABLE FREQUENCIES: 28KHz / 40KHz / 40-90KHz (With sweep system up to +/-1.5KHz).
AUTOMATIC FREQUENCY FOLLOWING: With 3 selectable modes.
FREQUENCY SWEEP WITH WIDTH CONFIGURATION: With 10 adjustable ranges, up to 3KHz with 300Hz steps. FREQUENCY SWEEP WITH SPEED CONFIGURATION: With 10 selectable sweep speeds, from 1Hz to 18Hz.
BURST SYSTEM WITH INTENSITY CONFIGURATION: With configurable overshoot from 0% to 100%. BURST SYSTEM WITH SPEED CONFIGURATION: With 6 configurable modes from 10ms to 60ms.
DEGAS SYSTEM: Degassing system with 3 configurable modes (short, medium and long time).
ANTI TRAVELING WAVE SYSTEM: Minimizes traveling waves in the tank.
STATIONARY WAVE SYSTEM: Minimizes the formation of standing waves in the tank.
OVER TEMPERATURE PROTECTION: The system controls the power temperature and gives an alarm if it is exceeded.
OVER CURRENT PROTECTION: The System monitors the current input and output and alarms if overcurrent occurs.
OVERVOLTAGE AND UNDERVOLTAGE PROTECTION: The system checks all system voltages and alarms if any of them fail.
EXTERNAL CONTROL WITH PLC: (Start/Stop, Sweep and Burst) with potential free contacts on the rear connector.
EXTERNAL CONTROL AND INTERNAL CONFIGURATION WITH PLC: Intuitive communication protocol over RS-485, no special software required, or also with modbus protocol over RS-485.
ALARM INDICATION: The system indicates on the rear connector if there is any alarm.
SIMPLE HMI (HUMAN-MACHINE INTERFACE): Simple operation for the configuration of t he ultrasonic generator.
EASY OPERATION WITH MULTIFUNCTION PUSH BUTTON: Switching between basic modes with a single button.